Article

Time clock rounding rules: what federal law and California allow

Published · Sources checked

Many time clocks round punches to the nearest 5, 6 or 15 minutes. Rounding is allowed under federal law, but only under a condition that's easy to miss, and California treats meal period punches differently.

The federal rule

The U.S. Department of Labor's regulation on time clocks says rounding to the nearest 5 minutes, or to the nearest tenth or quarter of an hour, "will be accepted, provided that it is used in such a manner that it will not result, over a period of time, in failure to compensate the employees properly for all the time they have actually worked." (29 CFR 785.48(b))

In other words, rounding has to be neutral over time. A policy that rounds both ways on paper but in practice moves time in the employer's favor can fail that test.

The same regulation also covers early and late punches: employees who voluntarily come in early or stay late don't have to be paid for that time if they don't do any work, and those punches can be disregarded. Major gaps between clock records and actual hours "should be discouraged since they raise a doubt as to the accuracy of the records." (29 CFR 785.48(a))

California: no rounding of meal period punches

The California Supreme Court held in Donohue v. AMN Services (2021) that employers can't use rounding for meal period time punches, and that records showing missed, short or late meals can raise a rebuttable presumption that a meal period wasn't provided as required. (Donohue v. AMN Services)

How to check your own rounding

  1. Export both rounded and actual punches if your system keeps both. (When I Work, for example, exports both when rounding is on; see the When I Work export guide.)
  2. Compare totals per employee over several pay periods: rounded hours vs. actual hours.
  3. Look at direction. If rounded time is consistently lower than actual time for most employees, the rounding isn't averaging out.
  4. In California, look at meal punches separately. Meal start and end times should be the actual times.

PunchAudit looks for rounding patterns that favor the employer over time, for employers in every state, as part of its federal baseline checks.

Informational only, not legal advice. Talk to an employment attorney or your state labor agency about your situation.